SciPres Sensor Specs

• Material, Fluid Contact: Natural Polysulfone meets USP Class VI and FDA 21 CFR 177.1520.
• All wetted materials are made of animal-free compounds.
• Compatible with most sanitizing agents such as NaOH for flow cell sanitization.
• Sensor Type: Medical Grade, Piezoresistive Sensing Element with on-chip temperature compensation
• Sensor Isolation: Insoluble silicone dielectric gel isolates sensing element from process solution. The gel is a non-toxic, non-allergenic elastomer system that meets all USP XX Biological Class V requirements.
• Pressure Range: 0 - 60 psi: Luer, 0.375" Barb and 0.500" Barb Sensors.
• 0 - 90 psi: for 0.750" TC and 1.00" TC Ladish Sensors
• Pressure Accuracy: +/- 0.30 psi at 60 psi
• Pressure Resolution: 0.01 psi Temperature Range: 0-60° C
• Sensor Microchip: EPROM, Stored Sensor ID and Calibration Factor
• Sensor Connector Cables: Lockable & Waterproof
• Sanitization: Can be sanitized with NaOH, NaCl, Formaldehyde, etc. Also Autoclavable & Gamma Radiation Stable
• Available Connector Types: Luer, 3/8" Barb, 1/2" Barb, 3/4" TC, and 1.0" TC
• Compatible Tubing Sizes:
  1. Luer: ID 0.03" to 0.31"
  2. 3/8" Barb: ID 0.31" to 0.38"
  3. 1/2" Barb: ID 0.50"
  4. 3/4" TC: Tubing with 3/4" TC
  5. 1.0" TC: Tubing with 1" TC Ladish
• Maximum Flow Rate:
  1. Luer: 2 liters/min
  2. 3/8" Barb: 8 liters/min
  3. 1/2" Barb: 17 liters/min
  4. 3/4" TC: 30.5 liters/min
  5. 1.0" TC: 60 liters/min
• Maximum Pressure:
  1. Luer: 60 psi
  2. 3/8" Barb: 60 psi
  3. 1/2" Barb: 60 psi
  4. 3/4" TC: 60 psi
  5. 1.0" TC: 60 psi