This page is actually a small piece of a much larger site called SciLog.com
You most likely got here from a search engine or other link... that's fine when you're done just head over to the main site. Or if you think there is a problem contact us.
SciPres Monitor Specs
Sensor Inputs: Up to Three SciLog Pressure Sensors (P1, P2, P3) Simultaneously.
Sensor Readout: Display of Sensor P1, P2 and P3 as well as Differential Pressure: DP= (P1 - P2) and Transmembrane
Pressure: TM= [(P1+P2/2)-P3]. Display of DP and TM are User-Selectable.
Analog Outputs: 4-20 mA Outputs for P1, P2, P3, and DP or TM, 18 Bit Resolution.
Digital Outputs: RS-232 and RS-485 for networking.
Alarm Outputs: 4 TTL Switches, User-Selectable Hi/Lo Pressure Limit Settings for P1, P2, P3, and DP or TM.
Power Supply: Wall Transformer (Lab Option); 115/230 VAC (Process Option).
Display: 2 Lines, 20 Characters each, Backlit.
Data Entry: Membrane Switch, 6 Keys.
Pressure Units: psi, kpa, bar, mmHg.
Pressure Range, High: 100 psi, Analog Out at 100%.
Pressure Range, Low: 0.0 psi, Analog Out at 0%.
Serial Com: BR=9600, WL=8, SB=2, PT=N.
Print Time: User Selectable, 1 to 60 Seconds.
Display Mode: Transmembrane Pressure (TM) or Differential Pressure (DP) as well as Display of P1, P2 and P3.
Alarm Outputs:
P1 Hi/Lo
P2 Hi/Lo
P3 Hi/Lo
TM/DP Hi/Lo
Time/Date: All Data Printout with Time/Date Stamp.