Hi!

This page is actually a small piece of a much larger site called SciLog.com
You most likely got here from a search engine or other link... that's fine when you're done just head over to the main site. Or if you think there is a problem contact us.

SciCon Monitor Specs

Operating Mode: Auto range conductivity from 200 mS/cm to 1 μS/cm; Temperature: 0 - 50° C, resolution 0.1° C.
Sensitivity Range: 1 μS/cm to 200 mS/cm; Resolution: 0.1 μS/cm.
Accuracy: High Range: ± 0.25 mS in the 10 - 200 mS range; Low Range: ± 3 μS in the 0 - 100 μS range.
Analog Output: 4 to 20 mA, 18 Bit Resolution.
Digital Outputs: RS-232 and RS-485 for networking.
Alarm Outputs: 4 TTL, Hi/Lo Conductivity, Hi/Lo Temperature.
Power Supply: Wall Transformer (Lab Option); 115/230 VAC (Process Option).
Display: 2 Lines, 20 characters each, backlit.
Data Entry: 6 keys.
SOFTWARE - SELECTABLE PARAMETERS
Conductivity Unit: μS, mS, PPM of KCl, PPM of NaCl, 442.
User Selectable 4-20mA Span: 0% = 0 and 100% = 200 mS or any other
Lo/Hi pair of conductance values. e.g. 5,000 μS to 80,000 μS.
Substantial Signal Offset Capability
Automatic Temperature Compensation
Edit Mode: Ability to adjust
1. Reference Temperature
2. Conductivity Value for a given Std Solution
3. Serial Com Baud Rate
4. Alarms
Time/Date: All Data Printout with Time/Date Stamp.
Lock-Out: On/Off, Requires Password (optional).
Re-Cal: Custom Calibration of Sensors.