SciLog - SciPres

Material, Fluid Contact:		Natural PP meet USP Class VI and FDA 21 CFR 177.1520. All wetted materials are made of animal-free compounds. Compatible with most sanitizing agents such as NaOH for flow cell sanitization.
Sensor Type:		Medical Grade, Piezoresistive Sensing Element with on-chip temperature compensation
Sensor Isolation:		Insoluble silicone dielectric gel isolates sensing element from process solution. The gel is a non-toxic, non-allergenic elastomer system that meets all USP XX Biological Class V requirements.
Pressure Range:		0 - 60 psi: Luer, 0.375" Barb and 0.500" Barb Sensors. 0 - 90 psi: for 0.750" TC and 1.00" TC Ladish Sensors
Pressure Accuracy:		+/- 0.30 psi at 60 psi
Pressure Resolution:		0.01 psi Temperature Range: 0-60° C
Sensor Microchip:		EPROM, Stored Sensor ID and Calibration Factor
Sensor Connector Cables:		Lockable & Waterproof
Sanitization:		Can be sanitizied with NaOH, NaOCl, Formaldehyde, etc
Available Connector Types:		Luer, 3/8" Barb, 1/2" Barb, 3/4" TC, and 1.0" TC
Compatible Tubing Sizes:		Luer: ID 0.03" to 0.31" 3/8" Barb: ID 0.31" to 0.38" 1/2" Barb: ID 0.50" 3/4" TC: Tubing with 3/4" TC 1.0" TC: Tubing with 1" TC Ladish
Maximum Flow Rate:		Luer: 2 liters/min 3/8" Barb: 8 liters/min 1/2" Barb: 17 liters/min 3/4" TC: 30.5 liters/min 1.0" TC: 60 liters/min
Maximum Pressure:		Luer: 60 psi 3/8" Barb: 60 psi 1/2" Barb: 60 psi 3/4" TC: 100 psi 1.0" TC: 100 psi
Part Numbers:		Luer: 080-693 3/8" Barb: 080-691 1/2" Barb: 080-692 3/4" TC: 080-698 1.0" TC: 080-697

*Patents Pending
© Copyright SciLog, Inc.

The SciLog SciPres combines pressure sensing capabilities and the convenience of disposability with easy setup. Each sensor is preprogramed and barcoded with a unique ID for easy traceability and data documentation when combined with the SciLog SciDoc software. Factory calibration data is also stored on each sensor's chip for out-of-box, plug and play use. The SciPres comes in 5 different sizes to fit a variety of tubing sizes: Luer, 3/8" barb, 1/2" barb, 3/4" TC (Tri-Clover), and 1.0" TC (Tri-Clover).

The SciPres Sensor Monitor provides three sensor inputs for measuring up to three SciLog pressure sensors (P1, P2 & P3) simultaneously. The sensor readout permits the user selectable display of differential pressure (DP) and trans-membrane pressure (TP). The SciPres Monitor has both analog outputs and digital outputs (RS-232 and RS-485 for networking). Four TTL alarm switches and user-selectable high / low pressure limit settings for each sensor input.