SciLog - SciCon

Material, Fluid Contact:		Natural PP, Gold, The Natural PP meets USP Class VI and FDA 21 CFR 177.1520
Sensor Type:		4-electrode conducitivity cell, Factory calibrated, Ready to use
Conductivity Range:		1 uS/cm to 200 mS/cm
Accuracy:		High Range: +/- 2.5 mS in the 10-200 mS Range Low Range: +/- 3 µS in the 0-100 µS Range
Temperature Range:		4 - 40° Celcius
Temperature Probe:		Thermistor, Factory Calibrated
Temperature Accuracy:		+/- 0.7° Celsius
Sensor Microchip:		EPROM, stores Device ID, Cell Constant, Temp Offset & Factory Cal Data
Available Connector Types:		Luer, 3/8" Barb, 1/2" Barb, 3/4" TC (Tri-Clover), and 1.0" TC (Tri-Clover)
Compatible Tubing Sizes:		Luer: ID 0.03" to 0.31" 3/8" Barb: ID 0.31" to 0.38" 1/2" Barb: ID 0.50" 3/4" TC: Tubing with 3/4" TC 1.0" TC: Tubing with 1" TC Ladish
Maximum Flow Rate:		Luer: 2 liters/min 3/8" Barb: 8 liters/min 1/2" Barb: 17 liters/min 3/4" TC: 30.5 liters/min 1.0" TC: 60 liters/min
Maximum Pressure:		Luer: 65 psi 3/8" Barb: 50 psi 1/2" Barb: 50 psi 3/4" TC: 80 psi 1.0" TC: 100 psi
Part Numbers:		Luer: 080-599 3/8" Barb: 080-594 1/2" Barb: 080-595 3/4" TC: 080-596 1.0" TC: 080-597PP (polypropylene), 1.0" TC: 808-597PS (polysulfone)

*Patents Pending
© Copyright SciLog, Inc.

The SciLog SciCon combines temperature sensing capabilities with conductivity sensing capabilities in a compact, disposable package at a low price point. Each sensor is preprogramed and barcoded with a unique ID for easy traceability and data documentation when combined with the SciLog SciDoc software. Factory calibration data is also stored on each sensor's chip for out-of-box, plug and play use. The SciCon comes in 5 different sizes to fit a variety of tubing sizes: Luer, 3/8" barb, 1/2" barb, 3/4" TC (Tri-Clover), and 1.0" TC (Tri-Clover).

The SciCon Sensor Monitor provides auto range conductivity from 200 mS/cm to 1 S/cm, with an operating temperature range of 0 - 100° C and a temperature resolution of 0.1° C. When connected to a PC using the SciLog SciDoc software, documentation of the sensor data can be completely automated.