LabTec Advantage:

The LabTec is a walk-up fluid dispensing system; you select the dispensing volume then press a key or foot switch to initiate the dispensing cycle. The LabTec provides high precision, high accuracy dispensing from milliliters to liters.

Dispensing accuracy and precision is assured with a simple, single key re-calibration feature. For ease of use, up to ten user-defined dispensing volumes can be stored in the LabTec.

LabTec Automated Dispensing System:

The LabTec Peristaltic Dispensing System automates the dispensing and diluting of samples. The LabTec has three different dispensing capabilities:

1. Volumetric Dispensing: Programmable batch-volume dispensing, e.g. the LabTec dispenses 10.00 ml in three seconds with a typical precision of better than 1%. Easy to enter and change aliquot sizes.
2. Weight Dispensing: The LabTec can be interfaced with an electronic balance for dispensing solutions by weight rather than by volume. Dispensing liquids by weight eliminates the need for pump calibrations while, at the same time, providing a level of accuracy and precision.
3. Weight Ratio Dispensing: The LabTec can be connected to an electronic scale platform to automatically weigh and dilute samples. Example: for a sample weighing 11.0 grams, the LabTec will automatically dispense 99.0 grams of diluent if the user defined weight ratio is set at 9.00. The LabTec will take 15 seconds to weigh the sample and to dispense the diluent; the typical dispensing precision is better than 0.5%

LabTec Sample Preparation For Bacteriological Analysis:

Automated weighing and diluting of food samples can be readily implemented with SciLog's low cost LabTec dispenser. Only an approximate food sample size is needed. The SciLog LabTec dispenser calculates and rapidly dispenses the required diluent. LabTec dispenser increases the speed and increases the precision of the entire sample prep process by automating the weighing as well as the dilution process.

LabTec Automated Solvent Dispensing:

SciLog has automated the safe and accurate dispensing of solvents supplied in the J.T. Baker CYCLE-TAINER Solvent Delivery System. This solvent dispensing station consists of a J.T. Baker CYCLE-TAINER closed, stainless steel, returnable container and a LabTec Smart Dispenser.

Pump Head Options:

LabTec Automated Data Collection

Example Data Collection Screen Shot

The SciDoc Documentation Package, used in conjunction with the PureTec, displays, calculates compiles, and documents 10 operating parameters; providing you with an instantaneous overview of your dispensing progress and status. This Excel based application also automatically populates graphs in real time. The LabTec gives you the information & control you need to optimize your dispensing for maximized accuracy.

 

 

Product Literature

• LabTec Product Brochure Letter A4
• Application Note: Automated Solution Dispensing
• Application Note: Automated Organic Solvent Dispensing
• Application Note: Automated Filling of Nunc Cell Factory
• Quick Start: Dispensing Organic Solvents
• Quick Start: Dispensing By Volume
• Quick Start: Dispensing By Weight

Related Downloads

• Application Note: Sample Preparation For Meat Testing
• Application Note: Sample Preparation For Food Testing
• Quick Start: Sample Preparation

Manuals

• LabTec Operating Manual

View Product Specifications Request Product Information »